Home / Products / 1 x 7.5 Tonne Car Truck Axle Support Jack Stand

Aussie Car Hoists

1 x 7.5 Tonne Car Truck Axle Support Jack Stand

$600.00
$1,450.00

In stock

7.5 Ton Fixed High Jack Stand for Trucks & Buses - Super Heavy Duty Supports Trucks & Buses After Lifting, 21-Hole Pin Lock & Fine Screw Adjustment, Easy-Position Spring-Loaded Tower & Casters

  • Industrial 30-Ton Combined Profile — Provides a massive 7.5-tonne individual rating, creating a rock-solid 30-tonne combined stabilization network when utilizing the complete set of 4 units.
  • High-Tensile Pin Adjustment — Features a heavy-duty mechanical steel locking pin tethered securely to the frame, ensuring positive mechanical lock-in at multiple precise height increments.
  • Wide Structural Base — Formed with an ultra-stable, reinforced high-gauge steel base frame that spreads high-tonnage downforce evenly across workshop floors to prevent tipping or sliding.
  • Deep-V Support Saddles — Outfitted with reinforced structural steel saddles designed to tightly cradle axle tubes, subframes, and heavy chassis rails without vehicle slippage.
Delivery Information

Delivery time varies by location and stock availability. Contact us if you need freight pricing or lead time before ordering.

Warranty & Returns

Warranty and returns depend on the product and manufacturer terms. Check the product details or contact us before purchase if you need clarification.

Overview

Unlike standard automotive jack stands or lower-capacity consumer stands that can warp, buckle, or tip under the massive off-center weights of heavy trucks, this genuine 7.5-tonne industrial truck axle stand set restores absolute stability to your service floor. It is engineered explicitly for high-throughput commercial vehicle fleet operations, diesel repair depots, heavy transport networks, and agricultural maintenance hubs running high-capacity vehicle maintenance facilities, meaning it serves as an indispensable workspace asset for eliminating structural shift risks and ensuring completely stable vehicle holding during continuous, high-leverage mechanical repairs.

Key Features

  • Reinforced High-Gauge Steel Construction — Fully welded with premium architectural-grade structural steel plating and heavy internal corner gussets to resist compression twisting and mechanical deformation under high stress.
  • Tethered Safety Retention Pins — Industrial-grade safety pins are connected to the main stand bodies via heavy-duty security chains, ensuring locking components are never misplaced or swapped with unrated shop bolts.
  • Industrial-Grade High-Visibility Finish — Treated with a thick, corrosion-resistant powder-coated surface layer formulated to withstand daily impacts, oil spills, chemical degreasers, and damp workshop conditions.
  • Ergonomic Carry Handles — Integrated with robust steel transport handles welded cleanly into the vertical columns, enabling technicians to quickly and safely reposition the stands across the workshop.

Before You Use

This set of 4 heavy-duty stands is configured exclusively for secondary vehicle stabilization on flat, industrial-grade concrete floor surfaces; never use these units on soft asphalt, dirt, or sloped surfaces. Always verify that the combined total weight of the vehicle being supported does not exceed the structural limits of the stands. Prior to lowering a vehicle onto the stands, double-check that the safety retention pins are fully pushed through both sides of the inner column tube and completely locked, and lower the hoist or jack slowly until the chassis rests fully in the center of the saddles.

What's Included

  • Four (4) individual premium heavy-duty 7.5-tonne structural pin-type truck axle stands
  • Four (4) heavy-duty mechanical locking safety pins with integrated retention chains

Please note that primary commercial hydraulic workshop jacks, air-hydraulic truck jacks, rolling floor hoists, and primary vehicle lifting structures are sold separately.

To establish a completely comprehensive, ultra-safe commercial heavy-vehicle service bay, consider combining these vital safety stabilization stands with our high-capacity air-hydraulic floor jacks, heavy-duty wheel chocks, or replacement hoist arm pads. Contact our technical support desk for trade bulk fleet purchasing options and national fast freight logistics options direct to your commercial workshop depot.

3-year warranty. In stock and shipped from Wendouree, Victoria.

Questions? Call 1300 090 266, Monday–Friday 8am–3pm AEST.

You May Also Like