Home / Products / Lifting Cables For 4 Post Vehicle Lifts 4 Tonne To 15 Tonne

Aussie Car Hoists

Lifting Cables For 4 Post Vehicle Lifts 4 Tonne To 15 Tonne

$90.00
$380.00

In stock

To Suit the Following 4 Post Car Hoists- YL-4000, YL-4000H, YL-9FW, YL-11FW, YLPF-4500, YL-4.0, YL-4.0B, YL-5500, YL-6500, YL-8000, YL-12000, YL-15000

  • Heavy-duty lifting cables engineered for consistent, synchronized lifting across all four posts, ensuring smooth and level operation every time
  • Built with high-tensile steel construction for superior load-bearing strength and long-term durability, reducing wear and replacement frequency
Maintenance & Adjustment Tips
Inspection: Check cables regularly for fraying, kinks, loose threading, or excessive slack.
Tension Adjustment: Adjust with the lift slightly raised off the locks using spanners on the top post nuts while holding the swage to stop the cable from twisting.
Lock Synchronization: Ensure all four corners engage the safety locks simultaneously, so the platform rests evenly.

Delivery Information

Delivery time varies by location and stock availability. Contact us if you need freight pricing or lead time before ordering.

Warranty & Returns

Warranty and returns depend on the product and manufacturer terms. Check the product details or contact us before purchase if you need clarification.

Overview

Unlike universal unrated hardware cables or low-grade wires that stretch easily—causing dangerous asymmetrical latch release sequencing where one side stays locked while the other drops—these certified replacement cables restores factory-spec mechanical safety.

Key Features

  • Precision Threaded Adjusters — Outfitted with high-tensile threaded end couplers and matching locknuts, allowing technicians to fine-tune cable tension.
  • Industrial Chemical Resilience — The heavy-duty protective outer casing is chemically formulated to resist continuous exposure to hydraulic fluid spray, motor oil, grease, and aggressive floor degreasers without degradation.
  • Zero-Marring Cable Route Guide — Smoothly handles complex internal column bends and pulley pathways, ensuring quiet mechanical travel and minimizing internal friction wear inside the hoist.
  • Heavy-Duty Eyelet Terminations — Engineered with reinforced mechanical eyelet ends that lock tightly into factory release handles and safety latch blocks, preventing slippage under high pull leverage.

Before You Order

This release cable kit is configured exclusively to suit the Aussie Car Hoists 4 Post vehicle hoists; please cross-check your hoist model identification badge before finalized ordering. Always check that the internal cable pulleys are completely clear of heavy grease debris, sand grit, or metal filings, and ensure they spin freely before running new cables. After routing, manually cycle the safety latches multiple times without a vehicle on the hoist to verify that both sides engage and disengage at the exact same moment.

Please note that primary replacement safety latch blocks, return springs, mechanical release handles, and primary 2-post vehicle hoist structures are sold separately.

To establish a completely comprehensive, ultra-safe vehicle service bay, consider combining these vital safety replacement cables with our high-tensile 20mm concrete anchor bolts, arm restraint gears, or replacement rubber lifting pads. Contact our technical support desk for trade bulk maintenance packaging and national freight logistics options direct to your workshop.

Questions? Call 1300 090 266, Monday–Friday 8am–3pm AEST.

You May Also Like