Sale!

4.5 Ton Base Plate Car Hoist Single Point Release YL-240

Product Status: In Stock

$2,950.00

Availability: 482 in stock

Calculate shipping

 

All Our Car Hoists Come With 3 Year warranty

Super Low Bottom Floor Plate Only 20mm High

We Only Sell Brand Name Hoists, If you are buying a hoist there are 2 main factors to look for

  1. Make sure your hoists name is that of the manufacturer eg if you are buying a Bendpak hoist then it is made buy Bendpak, A PowerRex is made by PowerRex, a Molner Hoist is Made by Molner etc etc, the reason that this is important is that if you ever need parts then parts are easily obtainable, there are to many re-branded hoists on the market our Hoists are called High-Lift and are manufactured by Highlift
  2. The easiest way to tell the quality of a hoist is by the weight of a hoist eg our 5 Tonne 2 post hoists weigh over 900kg there are many 2 post hoists on the market that weight 500kg or less so with less steel used in the manufacturing of the hoist they are cheaper to make but are more prone to flexing.

This Base Plate Hoist Has Double Extension Arms & Is Rated At 4500kg, It Is Suitable For Garages Or Sheds With Low Ceiling Height

Comes With Single Point Release

Heavy duty two post car lift is with 5mm thick posts, heavy-duty inside carriage and 2 arm extension arm design. This Aussie Car Hoist comes with twin Hydraulic+chain drive system, single lock release system, comes with heavy-duty 8mm steel cable.

Features:

  • Suitable For Garages or workshops with low ceiling height
  • Extra Thick 5mm Posts
  • Comes with double hydraulic rams with 8mm control equalization cables for double the safety
  • Low cable cover plate design, convenient for driving in and out.
  • Dual-cylinder lifting system, more stable and faster.Cable-equalization system
  • Chain-driven system, faster lifting speed.
  • Single lock release system, safe and reliable.
  • Wear-resistant, heat-resistant and high strength macro molecular polyethylene slide blocks
  • Pass 120% capacity dynamic load test and 150% capacity static load test.
  • Aussie Car Hoists Are Manufactured & Designed To Aust Standards EN1493-2010, BS EN
  • Aussie Car Hoists Are Work Safe Approved- Work safe Approval Number- V122428
  • Adjustable high quality screw type lift pads
  • Also Comes With Bonus Pad Height Extenders
  • Comes with concrete anchor bolts

Specifications:

  • Hydraulic fluid required for hoist is standard AW32 grade
  • Powder Coated Finish
  • Available In Both 3 Phase & Single Phase Will come Standard With Single Phase Pump Unless Otherwise Stating You Want 3 Phase
  • Power : 240V
  • Lifting capacity : 4500kg
  • Maximum lifting height : 1800mm
  • Minimum pad height : 100mm
  • Clearance between posts : 2940mm
  • Drive through clearance : 2650mm
  • Overall height : 2794mm
  • Overall width : 3477mm
  • Long arm maximum length : 1390mm
  • Long arm minimum length : 890mm
  • Short arm maximum length : 1050mm
  • Short arm minimum length : 740mm
  • Lifting time : less than or equal to 55 sec
  • Oil tank capacity : 10L
  • Lock : Manual single
  • Hydraulic fluid required for hoist is standard AW32 grade or in warmer areas 42 grade
  • Elevating system : Chain type
  • Minimum concrete thickness is 5inches, if you dont have this you will need to add a large plate under uprights (suggest 10mm x 800 x 800mm)
  • Must be minimum of 6inches away from edge of concrete

* Item is subject to minor modification on appearance and specifications, for improvement of product, without prior notice.  Please check before order.

WHY BUY FROM US – Aussie Car Hoists have been in business since 2003 and we stand behind the quality of our hoists.

We not only offer quality for your dollar, but most importantly back up our products with technical and after sales support which is only an email or phone call away. 

Packaging

  • 1. 2850mm x 670mm x 490mm (H) , 819kg
  • 2. 760mm x 260mm x 340mm (H) , 21 kg
  • Total gross weight = 840kg

CLICK ABOVE TO DOWNLOAD USER MANUAL

You may also like…